Customized Brown Ash Wood Veneer Flooring Fine Straight Crown Cut
Quick Detail:
Regular thickness:0.5mm,1.0mm.1.5mm,2.0mm
Regular width:133mm,125mm
Regular length:910mm,1220mm
Our natural flooring veneer species also have stock for
elm,Walnut,China cherry,Maple,Sapele,White oak and so on.
The flooring veneer can be used by furniture manufactures and by
the veneer doors manufactures
Description:
Flooring veneer, also known as floor veneer and floor top layer
veneer, is a thin real wood layer used for the top layer of veneer
wood floors, Veneer wood floors are different from solid wood
floors in that the real wood is just in the top layer of the
flooring, below that is plywood, particle board or some other
composite, it often looks just like a solid wood floor, you
actually see and feel real wood, that is exactly what makes the
difference in you home, office or shop, just like a fingerprint, no
two trees are identical, each veneer flooring is unique,
We often opt for the durability and strength of veneer flooring
that lets them showcase a particular wood without the expense of
solid wood flooring.
Steps:
1. First determine which direction you want the flooring to run.
Usually flooring is installed so it runs the length of the room for
aesthetic purposes, but it depends on personal taste.
2. Remove any baseboards as the flooring needs to be installed
close to the wall.
3. Place the underlayment on top of the existing floor or the
subfloor, as this will help reduce moisture and squeaking. Staple
the underlayment into place so it won’t shift.
4. Start at the corner of the room and place the first board with
the tongue facing toward the wall. Be sure to leave a gap of about
half-an-inch so the floor has room to expand and contract.
5. Place the second board next to the first so the shorter ends
touch and pull the second piece as close as possible.
6. For a tight fit, grab a small scrap piece of the flooring and
fit it into the grooves of the last piece. Place a block on the end
of the scrap piece and knock it with a mallet a few times until it
locks into place (figure B). Do not try to knock the wood directly, as it may damage the
edge. If a piece is damaged, save it to use later as an end piece.
7. Continue laying down the flooring in this manner. When you get
to the end next to a wall, mark with a pencil how much flooring
remains and cut down the piece to the appropriate size.
8. In order to lock the end piece into place, try using a smaller
scrap piece of flooring. If there isn’t enough room in the gap to
fit a tool, place a pry bar and pull it into place with the mallet
(figure C).
9. Continue laying down each floorboard until the room is complete.
For any irregular corners, try cutting the flooring with a jigsaw.
It’s best not to have the seams line up, so stagger the rows.
10. Many types of flooring comes pre-finished, but if you choose an
unfinished floor, be sure to sand it down, stain it and finish it.
Finally, reinstall the baseboards when all flooring is down.
Applications:
Inlay veneer, veneer,flooring and furniture
Specifications:
Name | China ash floor veneer |
Size | 133*930mm |
Thickness | 0.5mm,1.0mm,1.5mm,2.0mm |
Usage | for floor face |
We can accept special order with your own sizes.
Fixed size veneer
Competitive Advantage:
Good quality,competitive price,fast delivery and best service.
